The Premier Single 13 Polished Nickel door threshold is designed to join extra thick carpets with thinner floor coverings such as vinyl, LVT, Amtico and floorboards. Manufactured from solid brass with a polished nickel finish, it features a smooth curved profile that provides a neat, secure transition between floor coverings.
Description
The Premier Single 13 Polished Nickel door threshold is designed for joining extra thick carpets, typically between 13mm and 18mm, to thinner floor coverings including vinyl, LVT, Amtico and bare floorboards. Its curved edge slopes down to meet the adjoining floor covering, creating a smooth transition between the two surfaces while helping to avoid a trip hazard.
If you are fitting a standard thickness carpet, the manufacturer recommends choosing the Premier Single 9. For thin carpets and sisal flooring, the Premier Single 4 is the appropriate alternative.
Key Features
- Polished nickel finish
- Manufactured from solid brass with rounded edges
- Designed for joining extra thick carpets (13mm–18mm) to thinner floor coverings
- Suitable for use with vinyl, LVT, Amtico and bare floorboards
- Smooth curved edge slopes down to the adjoining floor covering
- Carpet is secured under tension using integrated teeth
- Suitable for most thick or dense carpets that compress to approximately 13mm
- Easywedges (3mm strips) included for raising the base where underlays differ in thickness
- Also known as a Premier Trim Single or Single Naplock
- Available in 900mm, 1000mm, 1800mm and 2700mm lengths
Sizing Specifications
Suitable carpet thickness:
- Extra thick carpets between 13mm and 18mm
- Most thick or dense carpets that compress to approximately 13mm
Available lengths:
- 900mm
- 1000mm
- 1800mm
- 2700mm
The threshold can be cut to the required length using a sharp hacksaw.
Important: The underlay should stop short of the door threshold. The Premier Single 13 is designed for level floor coverings, although the supplied Easywedges can be used beneath the fixing points where different underlay thicknesses need to be accommodated.
Flooring Compatibility
Compatible with:
- Extra thick carpet (13mm–18mm)
- Thick or dense carpet that compresses to approximately 13mm
- Vinyl flooring
- Luxury Vinyl Tile (LVT)
- Amtico flooring
- Bare floorboards
Alternative products:
- Premier Single 9 – for standard thickness carpet
- Premier Single 4 – for thin carpets and sisal
How to Choose the Right Door Threshold
The Premier Single 13 Polished Nickel door threshold is designed for joining extra thick carpets to thinner hard floor coverings. It is suitable for carpets between 13mm and 18mm thick and for most dense carpets that compress to around 13mm.
The threshold is designed to lie flat once installed, so both floor coverings should be level. If the underlays differ in thickness, the supplied Easywedges can be positioned beneath the fixing points to raise the threshold where required.
If your carpet is a standard thickness, the Premier Single 9 is the recommended alternative. For thin carpets or natural sisal flooring, choose the Premier Single 4.
How to Install a Door Threshold Step-by-Step
Installing a Premier Single 13 door threshold is straightforward:
- Measure the doorway and cut the threshold to the required length using a sharp hacksaw.
- Position the threshold where the carpet meets the adjoining floor covering.
- Fix the threshold using a proprietary adhesive, nails or screws, avoiding areas with underfloor heating.
- Ensure the underlay stops short of the door threshold.
- If required, position the supplied 3mm Easywedges beneath the fixing points to raise the threshold where underlays are different thicknesses.
- Compress thick carpets onto the pins before napping down.
- Use a carpeted wood block to 'nap down' the threshold, giving the carpet an extra firm grip on the pins and reducing the carpet height by approximately 2–4mm.
- Check the threshold sits securely across the flooring join.
For more help, see our guides on installing door threshold strips and cutting door bars to size.
How to Remove an Existing Door Threshold
- To remove an existing door threshold, first identify how it has been fixed.
- If secured with screws, carefully remove them using the correct screwdriver. Where nails have been used, gently lift the threshold using a claw hammer or pry bar.
- Release the carpet edge from the pins before removing the threshold, taking care not to damage the carpet or surrounding flooring.
- Remove any remaining fixings or debris before fitting your new door threshold.
Cleaning & Maintenance
- Clean using a soft cloth and a mild cleaning solution.
- This product is manufactured from solid brass and hand-finished, so the finish may vary slightly from batch to batch. As it is unlacquered, the finish may naturally age over time depending on its environment.
- For further advice, please see our guide to cleaning door thresholds.
Delivery Information
Free UK delivery is available on all orders over £100.
Many of our door thresholds and flooring trims are eligible for next-day delivery. This will be shown on the product page and again during checkout.
We deliver across Great Britain for most items, including Northern Ireland.
Orders are dispatched directly from our manufacturers using trusted couriers. As many of our products are hand-finished or made to order, delivery times may vary. Estimated delivery information is shown on each product page, with further details available on our Delivery page.
Frequently Asked Questions
What is the Premier Single 13 Polished Nickel door threshold used for?
The Premier Single 13 Polished Nickel door threshold is designed to join extra thick carpets with thinner floor coverings such as vinyl, LVT, Amtico and bare floorboards.
What carpet thickness is it suitable for?
It is suitable for carpets between 13mm and 18mm thick and for most thick or dense carpets that compress to approximately 13mm.
What finish does this version have?
This version is manufactured from solid brass and features a polished nickel finish.
Can it be used with standard thickness carpet?
No. For standard thickness carpets, the manufacturer recommends the Premier Single 9. For thin carpets and sisal flooring, the Premier Single 4 is recommended.
Do the floor coverings need to be level?
Yes. The threshold is designed to lie flat once installed. If the underlays differ in thickness, the supplied Easywedges can be used beneath the fixing points to raise the base where required.
What are Easywedges?
Easywedges are supplied 3mm strips that can be positioned beneath the fixing points to raise the threshold base where underlays are different thicknesses.
Can it be cut to size?
Yes. It can be cut to the required length using a sharp hacksaw.
How is the carpet secured?
The carpet is gripped under tension by the integrated teeth, while the adjoining floor covering sits beneath the curved edge.
Can thick carpet be compressed during installation?
Yes. Thick carpets can be compressed onto the pins before napping down. Once installed, a carpeted wood block can be used to 'nap down' the threshold, giving the carpet an extra firm grip on the pins and reducing the carpet height by approximately 2–4mm.
How do I maintain the polished nickel finish?
Clean with a soft cloth and a mild cleaning solution. As the threshold is manufactured from hand-finished, unlacquered solid brass, the finish may naturally age over time depending on its environment.
