Premier Ramps - Polished Brass

The safe way to bridge a 10-20mm step in a doorway or across a room

No screws, simply stick down

• The Premier Ramps solve the common problem of how to join two floorcoverings of a different height or not level with each other.
• Suitable for flooring which has a hard, smooth, sealed surface e.g. ceramic tiles, many laminates, engineered woods, stone (if sealed), LVT.
• The perfect transition from one height of floor to another, which can typically occur with home improvements or the installation of underfloor heating.
• No screws & therefore ideal where underfloor heating could be an issue.
• Made in a choice of 10 smart, natural metal finishes
• Available 900mm, 1000mm, 1800mm and 2700mm.
• If the height difference of your hard floors is 9mm or less, we suggest the Premier 2 Way Ramps.

Size options

• 10mm Ramp: Top 14mm, Slope 22mm, Total Width when fitted approx. 34mm
• 12mm Ramp: Top 14mm, Slope 27mm, Total Width when fitted approx. 38mm
• 14mm Ramp: Top 14mm, Slope 31mm, Total Width when fitted approx. 42mm
• 16mm Ramp: Top 14mm, Slope 36mm, Total Width when fitted approx. 46mm
• 20mm Ramp: Top 14mm, Slope 45mm, Total Width when fitted approx. 54mm

Fitting tips

• Self-adhesive strip on underside of top section strongly sticks the Door Ramp to the higher floor.
• The short side fixes to the upper floor surface. In this way, the angle created creates the correct drop/height of Ramp, as purchased e.g. 12mm, 14mm etc.
• Suitable for floating and non-floating hard floorcoverings i.e. those that expand and contract and those which are stuck down and static.
• Cut to length with a sharp hack-saw.
• Make sure the floorcovering is clean, degreased and dry before sticking down the Door Ramp.
• For information about how much your floor may expand, please refer to the manufacturer of the flooring.

Co-ordinating door bars and flooring trims in this range

Looking after & cleaning door ramps