At a Glance
-
Finish: Brushed Pewter (unlacquered)
-
Material: Solid brass
-
Range: Premier Range
-
Widths: 30mm, 38mm, 55mm
-
Lengths: 900mm, 1000mm, 1800mm, 2700mm
-
Height Difference Coverage: 4mm, 7mm or up to 10–11mm depending on width
-
Fixings Included: Yes – Spax screws supplied
What’s Included?
Each Premier Posh Pewter threshold is supplied ready to fit with:
- Pre-drilled solid brass door bar
- Matching plain inlay strip to conceal fixings
- Spax screws (approx. 25mm long)
Delivery & Returns
- Fastest available delivery: 3–5 working days
- Free UK delivery on qualifying orders
- Many products available for next-day delivery
- Returns accepted in line with our returns policy
Flooring & Door Compatibility
Designed to sit neatly over flooring joins, this threshold provides a clean, professional finish while protecting floor edges and reducing trip hazards. Its muted brushed pewter finish offers a softer alternative to polished metals, making it ideal for both traditional and contemporary interiors.
This threshold bar is compatible with:
- Carpet to carpet
- Carpet to hard floor (wood, laminate, tile or vinyl)
- Hard floor to hard floor
Suitable for internal doors including standard hinged, sliding and most bi-fold doors, provided there is a minimum 3mm clearance beneath the door.
Choosing the Right Door Threshold Size
Selecting the correct width is important for both performance and appearance:
-
30mm Width: Best suited to thin flooring such as vinyl or carpet tiles. Covers height differences up to 4mm. Not suitable for fitted carpets with gripper rods.
-
38mm Width: A versatile all-round option suitable for most flooring combinations, including fitted carpet. Covers height differences up to 6–7mm.
-
55mm Width: Ideal for thicker flooring, carpet with underlay and gripper, or where height differences reach up to 10–11mm.
Threshold lengths should be selected slightly longer than your doorway opening to allow trimming for a precise fit.
Measuring & Cutting Your Door Threshold
- Measure the width of the doorway at floor level
- Select the nearest longer threshold length
- Trim carefully to size using a fine-toothed hacksaw
For best results, cut slowly to avoid damaging the brushed pewter finish. You can also
read our guide to cutting an interior door threshold correctly
.
Installing Your Door Threshold
This threshold is designed for straightforward DIY installation using basic tools:
- Tape measure
- Pencil
- Drill and screwdriver
- Fine-toothed hacksaw
Installation tips:
- Position the threshold centrally over the flooring join
- Drill pilot holes carefully and avoid underfloor heating pipes
- Screw down firmly so fixings sit flush
- Allow approximately 12mm expansion gap when joining two hard floors
- Ensure the channel is clean before fitting the adhesive inlay strip
Once installed, the concealed inlay strip creates a seamless screw-free finish.
Read our guide to solving common threshold installation problems
.
Styling & Finish
Brushed pewter offers a subtle satin appearance that works beautifully in both classic and modern interiors. It pairs particularly well with:
- Neutral or stone-toned colour palettes
- Traditional homes with understated metallic accents
- Modern interiors where muted finishes are preferred over polished chrome
Maintaining Your Pewter Door Threshold
Manufactured from solid brass, Premier Posh thresholds are designed to withstand daily foot traffic in busy areas such as hallways, entrances and connecting rooms.
Over time, the pewter finish may naturally age slightly, enhancing its character and authentic appearance.
Maintenance recommendations:
- Wipe regularly with a soft damp cloth
- Avoid abrasive cleaners and scouring pads
- Dry thoroughly after cleaning to prevent water marks
- Use a suitable specialist metal cleaner occasionally if required
FAQs
Will this threshold work with different floor heights?
Yes. The Premier Posh Pewter threshold is available in three widths designed to accommodate a range of flooring heights and transitions. The 30mm width suits lower-profile flooring up to 4mm, the 38mm width covers most standard flooring combinations up to around 7mm, and the 55mm width is ideal for thicker flooring and carpet installations up to approximately 10–11mm.
What flooring types is this threshold compatible with?
This threshold is suitable for carpet, laminate, engineered wood, solid wood, tile, vinyl and most other common domestic flooring types. It can be used for carpet-to-carpet, carpet-to-hard-floor and hard-floor-to-hard-floor transitions.
Can I install this threshold myself?
Yes. The threshold is designed for straightforward DIY fitting and is supplied with fixing screws and a concealed inlay strip. Basic tools such as a drill, screwdriver, tape measure and hacksaw are all that are typically required.
Can the threshold be cut down to size?
Absolutely. The threshold can be trimmed using a fine-toothed hacksaw to achieve an accurate fit for your doorway. It is recommended to measure carefully and cut slowly to help protect the brushed pewter finish during installation.
Is the brushed pewter finish durable?
Yes. The threshold is manufactured from solid brass with a brushed pewter finish designed for everyday residential use. It is highly durable and suitable for busy areas such as hallways, entrances and connecting rooms.
Will the pewter finish suit my interior style?
Brushed pewter is a versatile satin-style finish that works well in both traditional and contemporary interiors. Its softer appearance makes it an excellent alternative to highly polished chrome or brighter metallic finishes.
