Premier Compression Ramp - Antique Bronze

Secure, easy to fit and self-adhesive transition strip for uneven floor levels

• The Premier Compression Ramp, also known as the Carpet Ramp, is ideal for bridging a step where a carpet joins a hard, non porous floor which is at a different level.
  • For example: if a tiled bathroom floor is higher than your landing carpet or vice versa e.g. higher carpet down to a wood block floor.
• Use in conjunction with Easyshims to cater for a height difference of up to 30mm (exact amount of lift depends on the thickness of your carpet).
• These smart carpet to tile transition, different heights are ideal for joining carpet to a non-porous floor e.g. ceramic tiles, wood, LVT, laminate & some sealed stone.
• Self-adhesive strip on underside of top and bottom section strongly sticks the Compression Ramp to the hard floor (whether lower or higher than the carpet).
• There are no screws and therefore an ideal door threshold where underfloor heating could be an issue.
• Suitable for floating and non-floating hard floorcoverings i.e. those that expand and contract and those which are stuck down and static.
• Made in 10 fashionable, unlacquered finishes.
• Available lengths: 900mm, 1000mm, 1800mm and 2700mm.
• Do watch the video to understand how the Compression Ramps work (see below) and how to use in combination with Easyshims for bigger height differences between floor levels.

Size options

• 5mm option: Top 14mm, Slope 16mm & Total Width when fitted 31mm
• 8mm option (discontinued by manufacturer).

Premier Compression Ramp fitting tips

• Cut to length with a sharp hack-saw.
• Make sure the floorcovering is clean and dry before sticking down the Door Ramp.
• Only stick down the side that touches the hard flooring - do not remove the protective strip on the underside of the section sitting over the carpet.
• For information about how much your floor may expand, please refer to the manufacturer of the flooring.