Aluminium Cover 38 Screw Down - Satin Brass

The carpet bar - Aluminium Cover joins most types of floorcoverings

A contemporary style and versatile - choose from 9 finishes

• The carpet bar - Aluminium Cover, is a versatile and secure door-plate. It is widely used as it caters for most types of floor coverings, including laminate, wood, LVT, carpet, stone, ceramic tiles and any combination.
• The carpet bar sits over the top of the two raw edges and is screwed in place. There are no fixings underneath.
• The screw holes are pre-drilled 150mm apart.
• The Cover can be used even when the two floors are not level with each other (see width options).
• If a carpet still needs to be raised up to the adjoining floor, then consider the Easyshims to create an invisible ramp of up to 15mm. Alternatively, take a look at one of the Ramp thresholds.
• Supplied with 25mm long screws, size 8, in a matching finish.
  
• Available 900mm & 1800mm long.

Width Options

• Suitable for all types of flooring. If fitting carpets, then these cover plates are ideal as they are designed to cover the gripper teeth, which are required to hold carpet in place.
  
• The Cover is designed to be installed flat/level or it can be installed at an angle (see diagrams below). This caters for up to 6mm.

Fitting

• Cut to length with a sharp hack-saw to fit your installation.
• Screw in, carefully avoiding any underfloor heating.
• Use gripper if fitting with loose carpets.

Co-ordinating door thresholds to complement the carpet bar - Premier Cover

We sell a choice of 4 brands of door thresholds and floor trims: Premier, Feline, Ali and Each brand has its own selection of unique styles and finishes. We therefore recommend you choose from the same range if you wish them to complement each other. You can do a search by selecting the relevant range name from the list of options shown under ""TYPE"" (left of web page).