Ali Wrap Nosing
The Ali Wrap Nosing is available for LVT 2.5mm or 3mm dryback (glue down) and requires 6mm plywood prep and is also available for WPC 8mm and WPC/SPC 6.5mm either Flush or Overlap (for the top step allowing expansion).
The Ali Wrap Nosing for LVT use a base material of aluminium for a high quality installation. Use the top layer of your flooring to form the curve.
Fits to existing bullnose (overhang) tread without squaring off the nosing or building out the riser.
Designed for 22mm - 25mm tread thickness and use Stycco Flex adhesive or similar.
Supplied with pre-attached adhesive tape for the LVT inlay.
Pre-Drilled and countersunk at 100mm centres and supplied with Spax-M self-drilling screws (Do not pre drill).
Requires a T20 star bit.
Suitable for returns (mitres).
Choice of standard finishes: Ali Brass, Ali Antique, Ali Chrome & Ali Black
Choice of length: 90cm (36"), 180 (71") and 270cm (106")
Choice of profiles: Ali Wrap Nosing LVT, Ali Wrap Nosing for WPC/SPC Flush and Ali Wrap Nosing for WPC/SPC Overlap.
Please Note: The Ali Wrap Nosing is out of stock in Antique.
Stock Code: Ali Wrap Nosing